Putting a conference call on hold
About this task
When you put a conference call on hold, the other parties can still talk to each other.
Procedure
Tap Hold during a conference call.
Dropping the last participant from a conference call
About this task
Use the following procedure to drop the last participant added to the conference call. Once you
drop the last added participant, you cannot use the procedure to drop other participants. The
deskphone plays an error tone if you try to use the drop method again. If you add another
participant after dropping the last added participant, you can use the drop method again to drop
this participant.
Note:
This feature is applicable only for a conference call of the AST 1 type.
Procedure
1. From the Phone screen, select your active conference call.
2. Tap Drop.
The deskphone drops the last participant added to the conference.
Viewing the details of a conference
About this task
Use this procedure to view the details of the participants on a conference call.
If you cannot, it might be due to the server on which your extension is configured. Contact your
system administrator.
Procedure
1. On the Phone screen, select your active call.
2. Press Conf.
3. Do one of the following:
• Dial the telephone number.
Standard call related features
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 62
Comments on this document? infodev@avaya.com
To Next Page
Loading...
