Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use the
Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, access the Features screen.
2. Select CPN Block.
3. Enter the extension number you do not want the called party to see.
4. Press Enter or OK to start calling party number blocking.Touch OK to start calling party
number blocking.
Making an auto intercom call
About this task
Use the auto intercom feature to call a specific extension or intercom group.
Procedure
1. Before dialing, scroll right from the phone screen to access the Features screen.
2. Scroll to Auto Icom and select that feature.
Two numbers display with the Auto Icom feature, for example “Auto icom 2 3”. The first
number denotes the intercom group number for the Dial Intercom feature. The next
number denotes the extension your administrator has predefined as your automatic
intercom destination extension.
3. Touch the number(s) that corresponds to the destination extension.
4. Touch Enter to activate the intercom call to that extension, where the call appearance
identifies the incoming call with your name followed by ICOM.
Setting up automatic call back
About this task
When an extension you call is busy, use Automatic Call Back to receive a return call automatically,
as soon as that extension is free.
Blocking your extension from displaying during calls
October 2019 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP 99
Comments on this document? infodev@avaya.com
To Next Page
Loading...
