BCM50 System Start Up
26 NN40010-318 Issue 1.2 BCM50 Rls 6.0
5. If you enter an IP Address manually, you will see the following
WARNING box before you can configure the remaining fields. Click
OK.
6. For manual configuration, continue entering the settings in the other
fields, and click OK.
7. If Obtaining an IP Address dynamically, tick the Obtain IP address
dynamically box. You will see the following WARNING box.
8. Click OK in the WARNING box, and click OK again in the Modify IP
Settings box.
9. You may lose your connection to Element Manager. You will not need
to reboot the BCM. Click the OK button, and reconnect to the BCM
using the new IP address (unless connected via the OAM port).
To Next Page
Loading...
