Avaya BCM50 - Page 48

BCM50 System Start Up
48 NN40010-318 Issue 1.2 BCM50 Rls 6.0
Trunk Port Details tab
Port details
3. Both trunk and analog station modules show port details. Ports settings
are directly related to the physical ports into which the PSTN lines or
telephony devices connect on the media bay modules.
Attribute
Value
Module type
Port #
Read-only
All modules
 These are the port numbers of the physical device.
Device
type
Read-only
All modules
 This is the type of module.
Line #
00X-XXX
CTM/GATM4
CTM/GATM8
Combo
DTM-
T1
DTM-
PRI
BRI-
T
The number of lines depends on the module type.
Call
State or
State
Idle
Active
Deprovisioned
All modules
This field indicates whether a module line or DN is in use or even provisioned.
Version
<read-only>
All modules
This field indicates the version of firmware running on the module.
DN
XXXX
ASM/GASM
DSM
Each port supports one telephone, hence, one DN record.
Addons
All modules