Avaya BCM50 - Page 49

BCM50 System Start Up
NN40010-318 Issue 1.2 BCM50 Rls 6.0 49
Attribute
Value
Module type
Indicates auxiliary items added to the telephony devices or trunks
Add-on
This is a list number.
Type
This field indicates the type of add-on, such as a KIM module.
Version
This field indicates the version of firmware running on the add-on device.
4. Open the Provision Lines tab and check that the required lines are
provisioned by clicking each line, and change the setting if necessary.
5. The module should now be Enabled.