Avaya DECT - Subscribing Handsets

Page 26 - Installation
Page 26 DECT - Installation Manual
Subscribing Handsets 38HBKD0001SAH – Issue 14 (27th October 2003)
Subscribing Handsets
Once a handsets details have been entered into the Registration screen of
CCFP Administration, the handset can be subscribed to the system.
Enabling Subscription
1. Run CCFP Administration.
2. Check that the handset details have been correctly entered.
3. Select Options and then Preferences. Click on the Advanced
Options tab. Click on Allow Subscription (a tick mark appears when
allowed).
4. Use the appropriate process below to subscribe the handset.
5. After subscribing the handset(s), switch Allow Subscription off (no
tick mark).
To subscribe an INDeX 20DT Handset
It is recommended to only subscribe one handset at a time and that all
previously subscribed System IDs are removed prior to subscribing for the
first time (see Removing a Subscription on page 28).
1. Press MENU and then > until LOGIN appears, then press 9. SELECT
LOGIN appears
2. Press > until SUBSCRIPTION CREATE appears, then press 9.
3. SEARCH ID appears. Press > until required system ID number
appears.
(The system ID is printed on the back of the Compact DECT Base
Station).
The handset displays the ID's of any systems in range. If there are
several systems locally, use < and > to display the different ID
numbers found.
4 When the required system ID is displayed, press 9.
5. Press > until CREATE SYSTEM 1 appears, press > until required
SYSTEM number appears.
6. When the required SYSTEM number appears.
7. AC: _ _ _ _ _ _ also appears.
If required enter an Account Code and/or press 9.
8. SUBSCRIPTION WAIT appears. If for some reason your handset
cannot subscribe it displays FAILED. Press to try again from step 2
above or press MENU to stop.
9. When successfully subscribed, your handset bleeps and your
extension number is displayed.