Procedure: Software Installation
Issue 6 September 2001
2-21
26. Submit the form.
Table 2-4. Station Form Fields (Page 3)
Field Name Explanation
Site Data
- Room Enter up to 10 characters to identify where the WT’s
charging base is located or where the WT user’s room is
located.
- Info1 Enter up to five characters that will be useful for
identification purposes.
- Info2 Enter up to five characters that will be useful for
identification purposes.
-Floor Enter up to 10 characters to identify the location of the
owner of the particular WT.
-Building Enter up to 10 characters to identify the location of the
owner of the particular WT.
-Set Color Enter black for the DWBS WT.
Abbreviated Dialing
- List 1
- List 2
- List 3
Enter p for personal, s for system, g for group, or e for
enhanced. A maximum of three Abbreviated Dialing lists
can be accessed by the DWBS handset. If p or g is entered,
a personal list number or a group number, respectively, is
also required.
Button Assignments
1. call-appr
2. call-appr
3. call-appr (9601+ only)
The listings in the left column are the only administrable
types for buttons 1, 2, and 3 that are supported by the WT.
The default is call-appr for buttons 1, 2, and 3.
1. brdg-appr
2. brdg-appr
3. brdg-appr (9601+ only)
The principal extension must be the same for all buttons.
The Auto Select Any Idle Appearance field must be set to y.
NOTE: The Bridged Call Alerting field should be set to y if
this option is used.
1. abrdg-appr
2. call-appr
3. call-appr (9601+ only)
Any administered analog extension.
NOTE: The Bridged Call Alerting field should be set to y if
this option is used.
To Next Page
Loading...
