DWBS Testing
4-6 Issue 6 September 2001
Figure 4-3. Firmware Versions Form (9630 Series WT)
4. If the firmware is newer on the MSS, or if the enabled server is set to “No,”
enter the enable wt-upgrade type [9601 or 9631] [PPCSS] [all]
command. This command takes 3.5 minutes per RC. The RC is taken out
of service while the file is being transferred.
NOTE:
Do not issue the enable wt-upgrade all command if your DWBS has
both 9601 WTs and 9630 Series WTs and if it has multiple RCs.
Instead, issue the appropriate enable wt-upgrade PPCSS command
for each RC individually.
list configuration firmware-versions
FIRMWARE VERSIONS
Name
Page 1
Version Size Checksum
TN789 RC 8.1
WFB v17
WT 9630 3CA
8.1.0
0.0.17
0.5.5
37000
8000
2C6E0
6629
4E89
1CC9
To Next Page
Loading...
