Procedure: Verifying Operative Cell IDs
Issue 6 September 2001
4-17
4. Confirm that the CAU’s green power indicator is illuminated.
If... Then...
Power indicator is
illuminated
Power is normal.
Power indicator is
not illuminated
Check the cable connection between the
WFB and the CAU. If the connection is good
but the problem still persists, check the
power (green) indicator on this CAU’s
connected WFB. If the WFB shows no
power, check the power supply to the WFB
(see Chapter 3 of this document for power
and cabling details). Restoring power to the
WFB will more than likely solve the problem.
If the problem persists, the CAU may need
to be replaced. If the indicator is illuminated,
repeat Step 1 of this procedure to obtain the
cell ID.
Flashing green
appears
CAU has not initialized.
To Next Page
Loading...
