Receiving and making calls
24 Issue 4 May 2003
To switch to the office phone while your cell phone is on an EC500 call:
NOTE:
This procedure applies to incoming calls picked up on an EC500-enabled
cell phone, and outgoing calls if you have an EC500 cell phone which sends
office caller ID. Be sure to notify the person with whom you are speaking
that you will be changing phones.
1. Pick up the office phone’s handset or turn the speaker on.
2. Press the lighted “call appearance” (line indicator) on your office phone that
shows the line is currently in use.
You are now conferenced onto the existing call.
3. Disconnect your cell phone from the call by pressing the appropriate “end
call” button on your cell phone.
4. Continue speaking using your office phone handset or speaker.
If your cell phone has voice mail, please review Chapter 3, "Voice mail" for
information on receiving business-related messages.
You can find procedures for enabling and disabling EC500 on a regular basis in
Chapter 4, "Enabling/disabling EC500 and maintaining security". This chapter
also discusses security and provides a procedure for changing your station
security code.
To Next Page
Loading...
