Avaya EC500 - Changing the Station Security Code Remotely

Enabling/disabling EC500 and maintaining security
38 Issue 4 May 2003
Changing the station security code remotely
Perform this procedure from any touch-tone phone.
NOTE:
You should have the EC500 access number recorded on your pocket
reference card.
1. Dial the EC500 access number.
You hear a dial tone.
2. Enter the EC500 security feature access code provided by your system
administrator.
You hear a dial tone.
3. Enter your office phone’s extension number.
4. Press # on your telephone keypad.
5. Enter your current station security code.
6. Press # on your telephone keypad.
7. Enter a new station security code.
Your station security code can be 1-4 digits. Valid values are #, *, 0-9 for
the initial digit; 0-9 for subsequent digits.
8. Press # on your telephone keypad.
You hear a confirmation tone indicating your security code has been
changed.
9. Hang up to end the call.
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat this procedure from Step 1. If you still do not receive a
confirmation tone, contact your system administrator for assistance.