Avaya ESS User Manual

ESS Installation Checklist
Issue 1.1 June 2005 97
6. ESS server: Install a
RFA license and
authentication file on each
ESS server
If the license file contains a
new module ID or if the
module ID has changed,
you must:
● Use the Bash
command, server
-z
● Use the SAT
command reset
system 4
If the license file contains
the same module ID as the
previous license file, with
the ESS functionality
turned on, you must:
● Use the SAT
command, reset
system 4
After loading the license
file, verify that the ESS
Administration and
Enterprise Survivable
Server feature is turned on.
To install the license and
authentication file see:
● Installing and Configuring
the S8500 Media Server
(03-300143), or
● Installing and Configuring
the S8700 Series Media
Server (03-300145).
To verify that the ESS
Administration and Enterprise
Survivable Server feature is
turned on see:
Avaya Enterprise Survivable
Servers (ESS) Users Guide, ESS
Server License Files on
page 110.
7. ESS server: Configure
the ESS server
The server’s web interface
is used to configure the
ESS server.
If the server was
re-mastered, use the Avaya
wizard to configure the
server.
If the server is already
configured, use the Avaya
Enterprise Survivable
Servers Users Guide to
configure the Enterprise
Survivable Server window.
To configure the server using the
Avaya wizard see:
● Installing and Configuring
the S8500 Media Server
(03-300143), or
● Installing and Configuring
the S8700 Series Media
Server (03-300145).
To configure a server with
existing configuration information
see:
Avaya Enterprise Survivable
Servers Users Guide, Existing
media server to ESS server on
page 137.
Table 10: Installing ESS with existing servers (continued)
Task Information Documentation
4 of 10

Avaya ESS Specifications

General

Brand	Avaya
Model	ESS
Category	Server
Language	English