Parameter name Default
value
Description
• 2: Use the OCSP field of the
Authority Information Access
(AIA) extension of the certificate
and then the OCSP_URI.
OCSP_USE_CACHE 1 Specifies that the OCSP caching is
in use.
Value operation:
• 0: OCSP is not used. Always
check with OCSP responder.
• 1: OSCP cache caching is used.
OPUS_PAYLOAD_TYPE 116 Dynamically specifies the RTP
payload type to be used for OPUS
codec. The parameter is used when
the media request is sent to the far-
end in an INVITE or 200 OK when
INVITE with no Session Description
Protocol (SDP) is received. The
range is between 96 to 127.
OUTBOUND_SUBSCRIPTION_REQUEST_DURATI
ON
86400 Specifies the duration in seconds
requested by the phone in
SUBSCRIBE messages, which can
be decreased depending on the
response from the server.
Valid values are 60 through
31536000 (one year). The default
value is 86400 (one day).
P
PHNCC 1 Specifies the country code for
United States. The value is 1.
Valid values 1 through 999.
PHNDPLENGTH 5 Specifies the internal extension
number length.
If your extension is 12345, and your
dial plan length is 5.
The maximum extension length is
13. This value must match the
extension length set on your call
server.
Valid values are 3 through 13.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 241
Comments on this document? infodev@avaya.com
To Next Page
Loading...
