Avaya J100 Series - Page 242

Parameter name Default
value
Description
PHNEMERGNUM Null Specifies an emergency phone
number to be dialed if the
associated button is selected.
Valid values can contain up to 30
dialable characters (0 to 9, *, #).
PHNMOREEMERGNUMS Null Specifies list of emergency
numbers separated by comma.
Valid values may contain up to 30
dialable characters (0 to 9, *, #).
PHNIC 011 Specifies the international access
code
For the United States, the value is
011.
Valid values are from 0 to 4 dialable
characters (0-9,*,#).
PHNLAC Phone's Local Area Code indicates
the phone's local area code, which
along with the parameter
LOCAL_DIAL_AREA_CODE,
allows users to dial local numbers
with more flexibility. PHNLAC is a
string representing the local area
code the phone.
Note:
This parameter is supported
when the phone is failed over.
PHNLD 1 Specifies the long distance access
code
Valid values are 0 through 9 and
empty string.
If long distance access code is not
needed then set the parameter to
null.
PHNLDLENGTH 10 Specifies the national phone
number length. For example,
800-555-1111 has a length of 10.
Valid values are 5 through 15.
PHNMUTEALERT_BLOCK 1 Specifies if the Mute Alert feature
is blocked or unblocked.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 242
Comments on this document? infodev@avaya.com