Avaya J100 Series - Page 246

Parameter name Default
value
Description
Value Operation:
• 0: Stop ringback tone as soon as
SDP is received.
• 1: Continue ringback tone until
RTP is received (default).
POE_CONS_SUPPORT Enables power over Ethernet
conservation mode.
Value Operation:
• 0: Power conservation mode is
not supported.
• 1: Power conservation mode is
supported.
PRESENCE_ACL_CONFIRM 0 Specifies the handling of a
Presence ACL update with pending
watchers.
Value Operation:
• 0: Auto confirm. Automatically
send a PUBLISH to allow
presence monitoring (default).
• 1: Ignore. Take no action
This parameter is not supported in
IP Office environment as presence
is not supported.
PRESENCE_SERVER Null Specifies the address of the
Presence server. This parameter is
supported only for backward
compatibility.
The value of this parameter is used
from PPM and not from the settings
file.
This parameter is not supported in
IP Office environment as presence
is not supported.
PRESERVED_CALL_DURATION 120 Specifies the time interval in
minutes if ENABLE_IPOFFICE is
set to 2 and if
MEDIA_PRESERVATION is set to
1 .
The time interval can be from 10
minutes to 120 minutes.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 246
Comments on this document? infodev@avaya.com