Parameter name Default
value
Description
coming out of the internal CPU of
the phone.
Valid values are 0 through 4094.
Note:
The parameter is configured
through the following:
• SET command in a settings
file
• LLDP
PKCS12_PASSWD_RETRY 3 Specifies the number of retries for
entering PKCS12 file password. If
user failed to enter the correct
PKCS12 file password after
PKCS12_PASSWD_RETRY retries,
then the phone will continue the
startup sequence without
installation of PKCS12 file. Valid
values are from 0 to 100.
Value operation:
• 0: No retry
PKCS12URL Null Specifies the URL to be used to
download a PKCS #12 file
containing an identity certificate and
its private key. Valid values contain
0 to 255 ASCII characters, zero or
one URL. The value can be a string
that contains either $SERIALNO or
$MACADDR, but it may contain
other characters as well. If
$MACADDR is added to the URL,
then the PKCS12 filename on the
file server includes MAC address
without colons. PKCS12 file
download is preferred over SCEP if
PKCS12URL is defined.
PLAY_TONE_UNTIL_RTP 1 Specifies whether locally-generated
ringback tone stops as soon as
SDP is received for an early media
session, or whether it will continue
until RTP is actually received from
the far-end party.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 245
Comments on this document? infodev@avaya.com
To Next Page
Loading...
