Avaya J100 Series - Page 248

Parameter name Default
value
Description
Value Operation:
• 0: Not displayed
• 1: Displayed (default)
Note:
Avaya J139 IP Phone does not
support Exchange integration
feature.
PROVIDE_EXCHANGE_CONTACTS 1 Specifies if menu items for
exchange contacts are displayed.
Value Operation:
• 0: Not displayed
• 1: Displayed (default)
Note:
Avaya J139 IP Phone does not
support Exchange integration
feature.
PROVIDE_KEY_REPEAT_DELAY 0 Specifies how long a navigation
button must be held down before it
begins to auto-repeat, and if an
option is provided by which the user
can change this value.
Value Operation:
• 0: Default (500ms) with user
option (default).
• 1: Short (250ms) with user option.
• 2: Long (1000ms) with user
option.
• 3: Very Long (2000ms) with user
option.
• 4: No Repeat with user option.
• 5: Default (500ms) without user
option.
• 6: Short (250ms) without user
option.
• 7: Long (1000ms) without user
option.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 248
Comments on this document? infodev@avaya.com