Avaya J100 Series - Page 249

Parameter name Default
value
Description
• 8: Very Long (2000ms) without
user option.
• 9: No Repeat without user option.
PROVIDE_LOGOUT Specifies if user can log out from
the phone.
Value Operation:
• 0: No
• 1: Yes
Note:
This parameter is set to 0 in IP
Office environment.
PROVIDE_NETWORKINFO_SCREEN Specifies if the Network
Information menu is displayed on
the phone.
Value Operation:
• 0: No
• 1: Yes
PROVIDE_OPTIONS_SCREEN Specifies if Options & Settings
menu is displayed on phone.
Value Operation:
• 0: No
• 1: Yes
PROVIDE_TRANSFER_TYPE 0 Provides the call transfer type in
3rd party environments.
Value 0 or 1.
PSTN_VM_NUM Specifies the dialable string that is
used to call into the messaging
system. For example, when you
press the Message Waiting button.
Note:
This parameter is supported
when the phone is failed over.
PUSHCAP 0000 Controls the modes of individual
push types.
The value is a 3, 4 or 5 digit
number, of which each digit controls
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 249
Comments on this document? infodev@avaya.com