Setting dialing options
About this task
Your phone has the following dialing options:
• You can dial a number by picking up the handset, getting a dial tone, and dialing the required
number (off-hook dialing).
• If you set the Edit Dialing feature, you can enter the number or a part of it, edit the entered
digits if needed, and press the corresponding softkey to dial.
When on-hook dialing is enabled, Edit Dialing is not available.
Procedure
1. Press Main Menu.
2. Navigate to Options & Settings > Call Settings > Edit dialing.
3. Press Change to select On (Enabled) or Off (Disabled).
4. Press Save.
Related links
Options & Settings on page 39
Setting Headset Signaling
About this task
You can get incoming call alert through your headset and the speaker. This might be convenient if
you want to turn the speaker alert off or you have a wireless headset.
Note:
Not all the headsets support audible alerts.
Procedure
1. Press Home.
2. Press Main menu.
3. Navigate to Options and Settings > Call Settings > Headset Signaling.
4. Select from the three settings using the corresponding buttons:
• None: No ringing tone is sent to the headset. Headset remains on hook till headset
switch-hook button is pressed for an incoming call.
• Switchhook and Alerts: On an incoming call, the phone plays an alert tone in the
headset every 5 seconds.
• Switchhook only: The phone does not send the ringing tone to the headset. The
headset switch-hook button is non functional.
5. Press Save.
Related links
Options & Settings on page 39
Options & Settings
April 2022 Using Avaya J169/J179 IP Phone H.323 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
