Avaya S8300 Series - Page 29

Install the replacement hard drive or server
03-300528 Issue 6 May 2009 25
Figure 3: S
1
8300C hard drive replacement
4. Detach the hard drive by pulling it directly out of the connector.
5. Locate the standoffs for the replacement hard drive. If standoffs are not included with the
new hard drive, remove the standoffs from the old drive and reuse them.
6. Screw the standoffs into the new hard drive.
7. Connect the hard drive to the hard-drive connector (Figure 3: S8300C hard drive
replacement on page 25).
8. Align the hard drive standoffs with the mounting holes on the replacement server.
1 S8300D Server image is similar to S8300C Server
Figure notes:
1.
S8300C Server
4.
Hard drive mounting screws (2)
2.
Hard drive
5.
Hard drive connector
3.
Hard drive standoffs (2)
h2dcchdr LAO 112006
REM
O
VE
ALM
APP
ACT
O
K
TO
SHUT DO
W
N
SERVICES
S8300C
C_V1
U
S
B
1
U
S
B
2
U
S
B
3
1
5
4
3
2