Avaya S8700 Series - Reusing a TN2312 AP;BP Circuit Pack

Connecting to the IPSIs
70 Installing and Configuring the Avaya S8700 Series Media Server
Reusing a TN2312AP/BP circuit pack
Note:
Note: This is not part of a normal installation process.
On occasion a customer may want to reuse a TN2312AP or TN2312BP circuit pack that was
previously programmed for DHCP or static addressing. You must erase the existing
programming before reprogramming it. Failure to do this may result in serious network
problems.
For information on erasing the programming, go to the Maintenance Procedures for Avaya
Communication Manager 3.0, Media Gateways and Servers (03-300432).