Completing the installation administration
74 Installing and Configuring the Avaya S8700 Series Media Server
Verifying date and time
These steps verify the date and time.
1. Type display time and press Enter.
2. Verify that the date and time are correct.
3. Verify that the correct rule (number) is displayed in the Daylight Savings Rule field.
4. If correct, press Cancel.
5. If not, go to the Maintenance Web Interface.
6. Under Server, click Set Server Time/Timezone.
7. Verify that the date and time are correct. If not, set it here.
8. Repeat steps 1 through 3.
Resolving alarms
Note:
Note: You can only resolve alarms on the active media server.
To resolve alarms:
1. Under Alarms click Current Alarms.
2. Select the server alarms to be cleared and click Clear.
3. Resolve any major alarms using SAT commands and a terminal emulation application, such
as Native Configuration Manager or MS HyperTerminal.
display time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: Friday Month: November
Day of the Month: 8 Year: 2002
TIME
Hour: 14 Minute: 19 Second: 36 Type: Standard
Daylight Savings Rule: 0
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
To Next Page
Loading...
