Small Form Factor Pluggable plus (SFP+) transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision
keying and low interface losses.
For more information about SFP and SFP+ transceivers, including technical specifications and
installation instructions, see Installing Transceivers and Optical components on VSP Operating
System Software, NN47227-301.
Optical power considerations
When you connect the device to collocated equipment, ensure that enough optical attenuation exists
to avoid overloading the receivers of each device. You must consider the minimum attenuation
requirement based on the specifications of third-party equipment. For more information about
minimum insertion losses for Avaya optical products, see Installing Transceivers and Optical
components on VSP Operating System Software, NN47227-301.
Supported optical devices
May 2016 Installing Avaya Virtual Services Platform 4850GTS Series 15
Comments on this document? infodev@avaya.com
To Next Page
Loading...
