Specifications 4850GTS 4850GTS-PWR+
Important:
12-volt output rise time, from 10 to 90 percent, must be the maximum of 50 ms and monotonic under all
defined input and output conditions.
Efficiency 70 percent minimum 70 percent minimum
DC power specifications
The following table describes the DC power supply specifications for the 4850GTS-DC model.
Table 10: DC power supply specifications
Specifications 4850GTS-DC
Output power 300 W
Input voltage 48 V DC
Input current 10 A
Output voltage 12 V DC
Output current 25 A
VSP 4000 power supply power specification
The VSP 4000 supports two external field-replaceable power supplies. One power supply ships with
the chassis. You can install a secondary power supply to provide redundancy and load sharing, and
to add Power over Ethernet Plus (PoE+) power budget on PWR+ models.
300 W AC power supply
The Avaya VSP 4850GTS supports 300 W AC power supplies.
Installing the Avaya VSP 4000 4850GTS Series
May 2016 Installing Avaya Virtual Services Platform 4850GTS Series 30
Comments on this document? infodev@avaya.com
To Next Page
Loading...
