Table 8: RJ–45 Console port pin assignments
Connector Pin Number Signal
1 Ready to send (RTS) — optional
2 Data terminal ready (DTR) — optional, can swap or link with pin
8
3 Transmit data (TXD) — mandatory
4 Carrier detect (DCD) — optional
5 Ground (GND) — mandatory
6 Receive data (RXD) — mandatory
7 Data set ready (DSR) — optional
8 Clear to send (CTS) — optional, can swap or link with pin 1
Power specifications for the Avaya Virtual Services
Platform 4000
This section describes power specifications for the Avaya VSP 4000 switches.
Power specifications for Avaya VSP 4000 switches 4850GTS and
4850GTS-PWR+
The following table describes the regulatory AC power specifications for the Avaya Virtual Services
Platform 4000 Series 4850GTS and 4850GTS-PWR+ switches. The regulatory power specifications
are based on the maximum rated capacity of the power supplies and are not based on typical power
consumption which is lower.
Table 9: AC power specifications for 4850GTS series
Specifications 4850GTS 4850GTS-PWR+
Input Current 5A/2.5 A 12A/6A
Input Voltage (rms) 100 to 240 VAC at 50 to 60 Hz 100 to 240 VAC at 50 to 60 Hz
Power Consumption 94.6 W maximum 248 W maximum
Thermal Rating 323 BTU/hr maximum 508 BTU/hr maximum
Inrush Current 40 A maximum 70 A maximum
Turn on Condition 1 second maximum after
application of AC power
1 second maximum after
application of AC power
Table continues…
Power specifications for the Avaya Virtual Services Platform 4000
May 2016 Installing Avaya Virtual Services Platform 4850GTS Series 29
Comments on this document? infodev@avaya.com
To Next Page
Loading...
