Figure 4: 300 W AC power supply
Connector
The 300 W and 1000 W AC power supplies use an IEC 60320 C16 AC power cord connector. The
AC power cord is in close proximity to the hot-air exhaust, and supports high operating
temperatures.
The 1000 W AC power supplies use an IEC 60320 C16 AC power cord connector. The AC power
cord is in close proximity to the hot-air exhaust, and supports high operating temperatures.
Figure 5: IEC 60320 C16 connector
Power over Ethernet Plus specifications
Table 11: Avaya VSP 4850GTS and 4850GTS-PWR+ models
Maximum PoE+ W
Average PoE+ W on 50 port model
855 W with one power supply
1855 W with two power supplies
15.4 W (802.3af)
17.8 W (802.3.at) — One power supply
32.4 W (802.3at) — Two power supplies
• VSP 4850GTS-PWR+ can support 802.3af 15.4 W on each port with one power supply
installed. You can add a second power supply for redundancy.
• VSP 4850GTS-PWR+ can support 802.3at 32.4 W on each port with two power supplies
installed. PoE+ power reduces to an average of 17.8W on each port with one power supply.
VSP 4000 power supply power specification
May 2016 Installing Avaya Virtual Services Platform 4850GTS Series 31
Comments on this document? infodev@avaya.com
To Next Page
Loading...
