16
SITE NAME
Assign a name for EVC system. Use the numeric pad on remote controller to enter the site
name.
After entering the site name, press to move to
Next button and press to go next step.
To go back to last step, press to move to
Back option and press to confirm.
[Note]
(1) Repeat press the number button to select the
character that user wants to enter.
(2) The site name is character only
NETWORK SETTING
Select the network environment that user has used.
Use or button to move to the selection
and press to confirm the selection.
[Note]
User can refer to chapter of Scenarios For LAN
Connection for the description of network
environment.
After selecting the network setting option, user
need to configure the network parameters. Follow
the below description to setup the network
settings.
To Next Page
Loading...