AVer EVC130P - Enabling;Disabling SIP; STUN Server Configuration

To Next Page

To Previous Page

FIREWALL

Configure the following items to setup the Firewall.

Select

Network

│

Firewall

and press .

Configure the following relative items to setup

the Firewall.

TCP/UDP Ports

By default, the system communicates through

TCP/UDP ports in the range from 30000 to

30019. You can specify the range for your

specific network environment.



You must configure your firewall to allow inbound/outbound traffic through TCP ports 1720/1719 for

H.323 call setup.

NAT Configuration

AVer EVC supports NAT systems that use the

internal IP addresses to communicate with

other devices outside the LAN.