76
H.460 Gatekeeper with Firewall Traversal
Your EVC system is connecting to the internet through a firewall and your have a Gatekeeper outside
the firewall.
1. From the remote press “Home”-> “ ” ->
“Setting”.
2. Press “ ” -> “Network”.
3. Press “LAN Configuration (IPv4)”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP”.
5. Manually input the “IP address”, “Subnet Mask” and
“Default Gateway”.
6. Select “Apply” and press (Enter).
7. In the same page, go to “Gatekeeper” and press
(
Enter).
To Next Page
Loading...
Need help?
General