38
Example2 OBS (Open Broadcaster Software):
Set the workstation and the TR300V2 camera in the same network. Check the workstation’s IP
address (Destination IP). Example:
Open OBS, add a scene, add a source, enter srt://Work Station IP:port?mode=listener
Example: srt://10.100.105.127:8889?mode=listener
[Note] If there is no image, please try right-click on the source->Transform->Fit to screen to
re-scale image.
HTTPS: Enable HTTPS to establish a secure connection between your browser and your camera.
To enable HTTPS access on your camera, follow the steps below.
1. Create a SSL certificate file for encryption and decryption.
2. In the HTTPS setup field, select On and then click the Choose File button to select the
certificate file. Click Upload.
To Next Page
Loading...
