Branch 19 - Bleeper functions
Sub-branch Value
00 - Bleep when below zero.
0 - Disabled.
1 - Enabled.
01 - Keyboard bleep.
0 - Disabled.
1 - Enabled.
02 - Target bleep.
0 - Disabled.
1 - Enabled.
03 - Error bleep.
0 - Disabled.
1 - Enabled.
04 - Bleeper volume.
0 - Quiet.
1 - Loud.
Branch 20 - Power saving
Sub-branch Value
00 - Backlight timeout. This is the length of time
between the last scale activity and the
backlight being deactivated.
0 - Permanently off.
1 - 5 seconds.
2 - 1 minute.
3 - 5 minutes.
4 - Permanently on.
01 - Sleep timeout. This is the length of time
between the last scale activity and the scale
going into 'SLEEP' mode.
0 - No sleep timeout.
1 - 1 minute.
2 - 5 minutes.
3 - 30 minutes.
Branch 29 - Key press duration
Sub-branch Value
00 - ’Long’ key press duration.
1 - 255 milliseconds X10 (E.g. 200 = 2sec).
14 Service Instructions
Product configuration branches
To Next Page
Loading...
