Printing Labels 3-1
PRINTING LABELS
This chapter describes printer setup and the data entry procedures
for each format.
Note: If you make a mistake entering data, press
to backspace one character, or press Clear to
erase all entered data.
To start printing formats:
When you turn on the printer, the keyboard briefly displays
9416CT KIT
COPYRIGHT 2006
Then, you see
FORMAT 1
1. Press or to select the format you need.
2. Press Enter.
3. See the following Format descriptions to enter the data.
Note: You may need to press Form to see the list of available formats.
3
To Next Page
Loading...
