Setting the Error Action
The recovery action from an error condition is in the Setup, Supply Menu.
You can change how the printer responds to a bad scan. The choices
include normal and overstrike/continue one to five consecutive bad scans.
The overstrike pattern is created to prevent someone from using a bad label.
Selecting overstrike and continue 1x-5x sets the number of times the printer
prints an overstrike pattern on consecutively bad labels before generating an
error. The user must clear the error before operation can continue.
Do not use the overstrike action with
♦ Peel mode
♦ Linerless supplies
♦ String tag supplies
For more information about the error actions, see the following table.
Error Action Standard
Peel
Verifier
with Peel
RFID with
Peel
Overstrike/Continue 1-5 No No No
Normal (no overstrike) Yes Yes Yes
Setting Supply Options 4-17
To Next Page
Loading...
