AVGO NP8KX - Picture Quality Adjustments

18
CUSTOMIZING TV SETTINGS
PICTURE
• Press MENU to display the main interface, use
the Arrow buttons to highlight TV SETTINGS and
press OK to conrm. Then use the Arrow buttons
to select PICTURE to enter and adjust each option
setting.
PICTURE MODE
Cycle among picture modes:
Energy Saving/Dynamic/Standard/
Movie/User.
Alternative: Press P.MODE button on
remote control to set the picture mode
directly.
BRIGHTNESS
Increase or decrease the amount of
white in the picture.
CONTRAST
Adjust the dierence between light
and dark levels in the pictures.
COLOR Control the color intensity.
SHARPNESS
Adjust crispness level in edges
between light and dark areas of the
picture.
TINT
Adjust the balance between red and
green levels.
COLOR
TEMPERATURE
Cycle among color temperatures:
Normal/Warm/COOL.
ADVANCED
OPTION
Set the following options:
Noise Reduction: Reduce the noise
level of the connected device: OFF/
WEAK/MEDIUM/STRONG.
White Balance: To set the di󰀨erent
options of white balance.
Red Gain/Green Gain/Blue Gain/Red
O󰀨set/Green O󰀨set/Blue O󰀨set.
Backlight: To set the value of
backlight.
OPEN HDR
Cycle among picture modes:
OFF/AUTO/LOW/MIDDLE/HIGH .