To Next Page
J
jon19Sep 23, 2025
Why can't I use Vudu and Pandora on my AVGO LED TV?
- EEmily Carpenter PhDSep 23, 2025
Vudu is only available in the US, and Pandora is only available in limited countries.
Why can't I use Vudu and Pandora on my AVGO LED TV?
Vudu is only available in the US, and Pandora is only available in limited countries.
How to fix AVGO LED TV remote control not working?
If your AVGO LED TV remote control isn't working, try these steps: First, make sure there are no obstructions between the remote and the TV, and that you're pointing the remote directly at the TV. Then, check that the batteries are installed correctly, matching the + to + and - to - polarities. If that doesn't work, try installing new batteries.
What to do if my AVGO LED TV has no picture and no sound?
If your AVGO LED TV shows no picture and no sound, first, ensure that the TV is actually switched on. If it is, try changing to another channel, as the issue might be with the broadcaster.
How to get picture on AVGO NP8KX when connecting HDMI?
If your AVGO LED TV has no picture when connecting an HDMI cable, verify that the input source is set to HDMI1, HDMI2, or HDMI3.
Why is there no sound on my AVGO NP8KX but picture is OK?
If your AVGO LED TV has picture but no sound, first, try pressing the VOL + or - buttons to increase the volume. Next, check if the sound is muted by pressing the MUTE button. If neither works, try switching to another channel to rule out a broadcaster issue.
How to resolve problems with video streaming on AVGO LED TV?
If you're experiencing problems with video streaming on your AVGO LED TV, check if your internet connection is fast enough for streaming HD or 4K videos.
How to fix unstable screen color on AVGO NP8KX?
If your AVGO LED TV screen color is unstable or shows a single color, check the signal cable. If the issue persists, reinstall the PC video card.
How to fix WIFI connection failure on AVGO NP8KX LED TV?
If your AVGO LED TV WIFI connection fails, check the signal strength, as the TV may be too far from the WIFI router. Verify the "authentication" setting and ensure the password is entered with correct upper or lower case letters. Check if the TV is connected correctly. Try powering off and unplugging the TV to reset it, and also try resetting the WIFI router, checking for interference or WIFI channel problems.
What to do if AVGO LED TV does not respond to buttons?
If your AVGO LED TV is not responding when pressing any buttons, it may have frozen up. Disconnect the power cord from the power socket for a few minutes, then reconnect it and try operating it again.
How to adjust picture ratio on AVGO NP8KX LED TV?
If your AVGO LED TV displays pictures in the wrong ratio, adjust the Aspect Ratio settings in the SETUP menu or press the ASPECT button on the remote control.
Walkthrough for first-time TV setup, including language, network, and channel scanning.
How to navigate and use popular streaming applications on the TV.
Instructions for playing photos and M-JPEG files from a connected USB drive.
Detailed steps for selecting and viewing picture files from USB storage.
Guide on how to play M-JPEG format video files from a USB device.
Options for menu language, transparency, zoom, and closed captions.
General
