CONNECTED MOTOR DRIVE KIT
CONTENTS
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - INSTALLATION PRECAUTIONS 04
3 - MAINTENANCE AND CLEANING 05
4 - RECYCLING 05
B - PRODUCT DESCRIPTION
1 - KIT CONTENTS 06
2 - EQUIPMENT REQUIRED (NOT INCLUDED)
06
C - INSTALLATION
SAFETY RULES 08
1 - ELIMINATING HAZARDS 08
2 - ATTACHING COMPONENTS 10
2.1 - Attaching the geared motor 11
2.2 - Attaching the rack 13
3 - ATTACHING THE FLASHING LIGHT 14
4 - ATTACHING THE SET OF PHOTOCELLS 16
5 - CONNECTIONS 17
6 - ELECTRONIC CONTROL CARD 18
7 - MOTOR POLARITY 18
8 - FLASHING LIGHT 18
9 - PHOTOCELLS 19
10 - HOMEGATE CONNECTED MODULE 19
11 - OPTIONAL ACCESSORIES 20
11.1 - Additional photocells 21
11.2 - Additional control parts 22
11.3 - Key selector 23
11.4 - Emergency stop parts 23
11.5 - Solar power kit 24
D - BEGINNING OPERATION
1 - SETTINGS INTERFACE 25
2 - QUICK SETTINGS 25
2.1 - Menu structure 25
2.1.1 - Réglages simples [basic settings
menu (MENU 1) 26
2.2 - Photocell alignment procedure 27
2.3 - Self-learning 27
2.4 - Programming remote controls 28
2.4.1 - Programming with the card 28
2.4.2 - Copy programming 28
2.4.3 - Deleting all remote controls 29
2.5 - Motor force 29
2.6 - Operating mode 29
2.7 - Time delay 30
3 - ADVANCED SETTINGS 30
3.1 - Access to advanced settings (MENU 2)
30
3.2 - Réglages avancés [advanced settings]
menu (MENU 2) 31
3.2.1 - Speed 31
3.2.2 - Acceleration 31
3.2.3 - Photocell self-test (optional) 32
3.2.4 - Pre-flashing time 32
4 - HOMEGATE CONNECTED MODULE
START-UP 33
4.1 - Installing the mobile application and
creating an account 33
To Next Page
Loading...
