Avidsen 114461 - Programming the Gate Opening Automation

EN41
CONNECTED MOTOR DRIVE KIT
D - BEGINNING OPERATION
The following part is related to the actions that will be
triggered by the conditions:
1
3
5
2
4
1
Allows you to use a previously defined
scenario (set of actions)
2
Allows you to use a previously defined
automation (an automatic action)
3
Allows you to send a notification to the
smartphone when automation is active
4
Allows you to insert a pause of an adjustable
time period in the performance of actions
5
Set an action on a device already recorded
in the app
The last setting allows you to define a time slot during
the day, if necessary, during which to authorise the
automation launch:
Once all these settings have been confirmed, you
can save your automation at the top right
4.6.3 - PROGRAMMING THE
“GATE OPENING” AUTOMATION
The automatic action in this example will allow the
user to open their gate at a given time, only if the gate
is initially closed.
The conditions must be selected; in our case, we
need a time condition as well as the status of the
gate.