CONTENTS
A - SAFETY
INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - INSTALLATION PRECAUTIONS 04
3 - MAINTENANCE AND CLEANING 05
4 - RECYCLING 05
B - PRODUCT
DESCRIPTION
1 - CONTENTS OF THE KIT 06
2 - EQUIPMENT REQUIRED (NOT INCLUDED)
06
C - INSTALLATION
1 - HAZARD ANALYSIS 07
1.1 - Regulations 07
1.2 - Specifications of the gate to motorise 07
1.3 - Safety check on the gate 07
1.4 - Safety rules 08
2 - ELIMINATING HAZARDS 08
3 - INSTALLING THE MOTORS 09
4 - INSTALLING THE SWITCHGEAR 15
5 - INSTALLING THE FLASHING LIGHT 15
6 - INSTALLING THE SET OF PHOTOCELLS
(OPTIONAL) 16
7 - CONNECTIONS 18
7.1 - The mains electricity 19
7.2 - Telescopic motors 20
7.3 - Flashing light 20
7.4 - Photocells (optional) 21
7.5 - Control parts (optional) 21
7.6 - Backup battery (optional) 22
7.7 - Solar power kit (optional) 22
D - BEGINNING
OPERATION
1 - SETTINGS INTERFACE 23
2 - BASIC SETTINGS (MENU 1) 23
2.1 - Menu structure 23
2.1.1 - Basic settings menu (MENU 1) 24
2.2 - Photocell alignment procedure
(optional) 25
2.3 - Operating mode 25
2.4 - Time delay 25
2.5 - Motor force 26
2.6 - Speed 26
2.7 - Self-learning 26
2.8 - Programming remote controls 28
2.8.1 - Programming with the card 28
2.8.2 - Copy programming 28
2.8.3 - Deleting all remote controls 29
3 - ADVANCED SETTINGS 29
3.1 - Accessing the advanced settings
(menus 2 and 3) 29
3.2 - Advanced settings menu (menu 2) 30
3.2.1 - Acceleration 30
3.2.2 - Photocell mode 30
To Next Page
Loading...
