4
A360 PersonAl Mixer User GUide
Compatibility
The A360 Personal Mixer is compatible with Pro16, Pro16e, and Pro64 A-Net devices as detailed below.
Pro16 Products
The A-Net out from the following Pro16 devices may be connected to the A360 Personal Mixer’s
A-Net IN port:
• AN-16/i v.2 Input Module
• AN-16/i Input Module
• AN-16/i-M Mic Input Module
• AV-M8 Mic Input Module
• Aviom16/o-Y1 A-Net Card for Yamaha® devices
• A-16D and A-16D Pro A-Net Distributors
• D800 and D800-Dante A-Net Distributors
• D400 and D400-Dante A-Net Distributors
• A-16II Personal Mixer
• A-16R Rack-mount Personal Mixer
• AN-16/o Output Module
• AV-P2 Output Module
• Third-Party Pro16 A-Net digital console cards
Pro64 Products
Adding the ASI A-Net Systems Interface to a Pro64® digital snake or audio network allows Pro64 channels
to be translated into Pro16 data. The ASI separates the 64-channel Pro64 stream into up to four 16-channel
Pro16 outputs, depending on the Pro64 sample rate being used. Any of the four Pro16 A-Net outputs from
the ASI may be connected to the A-Net In on the A360 Personal Mixer either directly or by adding an A-Net
distributor to the signal path between the ASI and A360.
The ASI’s Pro16 A-Net outputs can also be connected to the A-Net In on the AN-16/i v.2 Input Module when
creating a personal mixing system that uses the enhanced Pro16e version of A-Net for increased channel
count.