70
A360 PersonAl Mixer User GUide
Analog Cabling
Connect the mIxeS out port from the D800 to A-Net IN on the AN-16/o v.4 Output Module with a Cat-5
cable. Analog connections for the inputs to the wireless transmitter units are available on two DB25
multipin connectors on the AN-16/o v.4 (wired to the Tascam analog standard).
The Mixes Out port on a D800 connects to A-Net In on the AN-16/o v.4. Up to eight stereo mixes can be connected to the
inputs of wireless in-ear transmitters from the AN-16/o v.4 multipin analog outputs.
To Next Page
Loading...