User’s Manual
8.4 Caring the Auto Document Feeder
8.4.1 Cleaning the Feeding Rollers
From time to time the pad assembly and feeding rollers may
become contaminated with ink, toner particles or paper dust.
In this case the scanner may not feed documents smoothly.
If this occurs please follow the cleaning procedures to return
your machine to its original state.
The Cleaning Procedures
1. Dip a soft clean cloth with isopropyl alcohol (95%).
2. Open the front door slightly to the left. Wipe the feeding
rollers. Rotate the roller forward with your finger and
repeat the cleaning steps above until the entire roller is
cleaned.
3. Wipe the rubber part of the ADF pad. Be careful not to
damage the pick springs.
4. Close the scanner front door. Your scanner is now ready
for use.
Figure 8-5
To Next Page
Loading...
