User’s Manual
8.4.3 Replacing the ADF Roller
After scanning approximately *200,000 pages through the ADF,
the ADF roller may be worn out and you may experience
problems with document feeding. In this case, you may need
to replace a new ADF roller. For ordering the ADF roller, please
consult your nearest dealer and follow the procedure below to
replace it.
Disassembling Procedure
1. Open the ADF front cover to the left.
Figure 8-9
Note:
Consumables must be replaced regularly. It is
recommended to purchase new consumables in advance so
that they can be replaced before the end of their life time.
The replacement cycle is based on the use of A4 (80 g/m2
[20 lb]) wood-free paper or plain paper. The actual cycle
varies according to the type of used paper and how
frequently the scanner is used and cleaned.
Use only the specified consumables.
To purchase consumables, contact the store where you
purchased the scanner or an authorized scanner service
provider.
To Next Page
Loading...
