User’s Manual
For documents larger than A4/letter size, such as
A3
Align the top of the document to the top of the Carrier
Sheet (the printed section) and the folded portion to the
right edge of the Carrier Sheet so that the document fits
into the Carrier Sheet at the upper corner.
For non-standard document
Center your document in the Carrier Sheet.
2. Load the Carrier Sheet with the gray section (printed
section) facing downwards.
3. Adjust the paper guides to the width of the Carrier
Sheet.
Adjust the paper guides so that there is no space
between the guides and the Carrier sheet. Space
between the guides and Carrier Sheet may cause the
Carrier Sheet to become unaligned during scanning, and
skew the scanned image.
4. Start the scan.
To Next Page
Loading...
