AviteQ Vibtronic SC-2 Series User Manual

0–1
Connections and display elements
Intended use
The VIBTRONIC SC…-2 and SCE…-2 type controllers are designed and con-
structed as alternating voltage regulators for controlling magnetic vibrators; they
operate on the voltage regulation principle (phase regulation).
The controllers have been designed for use with mains networks having a fre-
quency of either 50 or 60 Hz and a sinusoidal voltage.
Do not use the controllers in environments with explosion hazards (explosives,
gassy environments)! Observe the information regarding the intended uses given
in Chapter 1.3!
Magnetic vibrator connection
Command value inputs
Release
Operating indicators
Trimming potentiometer R1
Mains connection
Command value input commutation
Status relay

AviteQ Vibtronic SC-2 Series Specifications

General

Brand	AviteQ
Model	Vibtronic SC-2 Series
Category	Controller
Language	English