Operating Manual for Controller VIBTRONIC
®
SC(E)…-2
©2002 AViTEQ Vibrationstechnik GmbH Version 02/2003 0–2
For your safety
You will find three different types of symbols in this operating manual which are
intended to point out important information:
The DANGER warning describes procedures or conditions which could have dan-
gerous or even life-threatening consequences for the person installing or using the
equipment.
You will find this information with procedures in which a danger of damage to
equipment exists. However, this may also result in personal injury (e.g. in case of
fire).
Notes provide information about individual procedures. Notes explain circum-
stances, clarify terminology or provide tips for simplifying processes or proce-
dures.
Although we developed the VIBTRONIC controllers taking into account all safety
measures, operational error cannot be completely eliminated. In the interest of
your safety and that of your colleagues, observe the following information:
When connected to mains, dangerously high voltages are present inside the con-
troller. Touching electrically live components can be lethal! Before switching on
mains power, ensure that no live parts can be touched.
Explosions can be life threatening and result in great damage to equipment.
Do not use the controller in environments with explosion hazards.
The controller of type SC(E)…-2 is not designed for environments with explosion
hazards or firedamp environments and must not be used in such without first tak-
ing appropriate measures.
Unsuitable controllers, operation with the incorrect mains voltage/frequency could
result in damage to the magnetic vibrator. Make sure that the connection values
are correct and compare them with the device-type plates!
DANGER!
NOTE
DANGER!
DANGER!
To Next Page
Loading...
Need help?
General
