Chapter 3: CLI Appliance Settings Options 47
Appliance_Settings/Online Help
Enter cd appliance_settings/online_help to navigate to the online_help level.
--:- units cli-> cd appliance_settings/online_help
To set the online help URL:
Perform this procedure if you have downloaded the online help files to a web server that is
accessible to the console server.
1. Enter the following command.
--:- units cli> cd appliance_settings/online_help
2. Enter the following command.
--:- online_help cli> set url=<online_help_location>
A line similar to the following appears.
**:- online_help cli>
3. Save your settings.
**:- online_help cli> commit
Table 3.13: Boot Configuration Options
Boot_Configuration Navigation Tree
boot_configuration
(*) flash
(*) image_1
( ) image_2
( ) network
appliance_ip_address=
tftp_server_ip=
filename=
watchdog_timer
eth0_mode=
eth1_mode=
console_speed=
To Next Page
Loading...
