Camera Control Commands
Command Function Command Packet Comments
Red 8x 01 7E 01 0A 00 02 03 FF Tally Light RedON
Green 8x 01 7E 01 0A 00 03 02 FF Tally Light GreenON
CAM_TallyLight(Cm7x only
with license active)
Off 8x 01 7E 01 0A 00 03 03 FF Tally Light OFF
Preset_H_Speed Horizontal (Pan) speed
between presets
8x 01 03 01 qq FF qq= speed setting1 ~ 25 (1 = 00
HEX,
25 = 18 HEX)
Preset_V_Speed Vertical (Tilt) speed between
presets
8x 01 03 02 qq FF qq = speed setting1 ~ 21 (1 = 00
HEX,
21 = 14 HEX)
Preset_Z_Speed Zoom speed between
presets
8x 01 03 03 qq FF qq = speed setting1 ~ 8 (1 = 00
HEX,
8 = 07 HEX)
Blue_Tuning
(autowhitebalance active)
more or less blue while
maintaining auto white
balance active
8x 0A 01 13 pp FF pp = setting
-10 ~ +10(00~14 HEX)
Red_Tuning
(autowhitebalance active)
more or less red while
maintaining auto white
balance active
8x 0A 01 12 pp FF pp = setting
-10 ~ +10(00~14 HEX)
Camera Control Commands
Command Function Command Packet Comments
pp: Video Format
00: 1080p60
01:1080p50
02: 1080i60
03: 1080i50
04: 720p60
05: 720p50
06: 1080p30
07: 1080p25
08: 720p30
09: 720p25
0A: 1080p59.94
0B: 1080i59.94
0C: 720p59.94
0D: 1080p29.97
VideoSystem_Set
(CM40 series: It is possible to set the video format, but since
the video format is dictated by the computer the camera is
connected with, the picture will NOT change to that format.)
8x 01 06 35 00 pp FF
0E: 720p29.97
69
To Next Page
Loading...
Need help?
General
