Style
Figure 29: WebGUI > VIDEO > Camera Settings > Style
Here, you can choose the style you want, such as Default (standard setting), Normal (which makes the picture
more ‘natural’), Clarity (makes the picture more clear), Bright (which makes the picture more bright) and Soft
(which softens the picture).
CCM (Customizable Color Matrix)
If you have purchased the additional license for SRT and the Customizable Color Matrix (CCM), the Camera
Settings menu will have an extra tab in the camera settings: CCM. With this feature you can match the colors
from the Avonic CM70 series cameras with cameras from other manufacturers. The colormatrix is a 3x3 "table" that
affects red, green and blue in the filmed picture and their relation to it.
1. Open Video > Camera Settings > CCM
2. Click on Enable CCM to enable this feature. You will see the default setting with a natural picture.
3. Read the paragraphs below first before you are changing these numbers!
Channels and Signals
The color matrix becomes visible when the CCM feature is enabled. It has a vertical and a horizontal Red, Green,
Blue (RGB) row. By filling these with numbers it is possible to change the colors in the picture.
1. Channels: Horizontal RGB row. This corresponds with red, green and blue parts in the picture, but
changes also secondary colors, because these colors are having some red, green and blue in them.
2. Signals: Vertical RGB column. This subtracts or adds red, green, blue from or to the filmed picture.
30
To Next Page
Loading...
