Using the Remote Control
The Product is provided with an IR Remote Control for full control of the camera and use of the OSD menu.
Figure 47: Remote Control
The various options (a. through n.) are described below.
a. Power
1. Put two AAA 1.5v batteries in the IR Remote Control. Use ONLY this type of batteries! Using other
type of batteries can damage the IR Remote Control.
2. Press the Power button to turn on the camera. If the position preset '0' has been stored, this will be
called after initialization.
3. Press the Power button again to turn the camera off. It will turn to the back when turned off, this is
called the “privacy mode”.
b. Set
This button has no function with this camera.
41
To Next Page
Loading...
Need help?
General
