Avonic CM70-IP User Manual

Network
Network configure and port settings
Network Configure
Get network port parameters
Code {"GetEnv":{"NetWork":{"nChannel":-1}}}
Set network port parameters
{"SetEnv":{"NetWork":{"stNetPort":
{"wPortSoap":1936,"wPortData":3000,"wPortWeb":80,"wPortRtsp":554,"wPortVisca":
1259,"wPortOnvif":2000,"wPortRtmp":1935}}}}
Code
You can also set one of these parameters like this:
{"SetEnv":{"NetWork":{"stNetPort":{"wPortSoap":1936}}}}
Port Settings
Function Code Command Setting
Port Data wPortData [0, 65535]
Port Web wPortWeb [0, 65535]
Port Onvif wPortOnvif [0, 65535]
Port Soap wPortSoap [0, 65535]
Port Rtmp wPortRtmp [0, 65535]
Port Rtsp wPortRtsp [0, 65535]
Port Visca wPortVisca [0, 65535]
Ethernet
Ethernet
Get Ethernet parameters
Code {"GetEnv":{"NetWork":{"nChannel":-1}}}
Set Ethernet parameters
Code "SetEnv":{"NetWork":{"stEth":
[{"byValid":5,"szIPAddr":"192.168.5.126","szSubMask":"255.255.255.0","szMacAddr":"E4:77:D4:01:8A:49",
"szGateway":"192.168.5.1","bDefault":1}]}}}
Function Code Command Setting
DHCP {"SetEnv":{"NetWork":{"stEth":[{"byValid":5}]}}} byValid 5:off
7:on
IP Address {"SetEnv":{"NetWork":{"stEth":[{"szIPAddr":"192.168.5.127"}]}}}
Subnet Mask {"SetEnv":{"NetWork":{"stEth":[{"szSubMask":"255.255.255.0"}]}}}
Default Gateway {"SetEnv":{"NetWork":{"stEth":[{"szGateway":"192.168.5.1"}]}}}
DNS
DNS
Get dns parameters
Code {"GetEnv":{"NetWork":{"nChannel":-1}}}
Set dns parameters
Code {"SetEnv":{"NetWork":{"stDns":{"szDns1":"8.8.8.8","szDns2":"0.0.0.0"}}}}
Function Code Command Setting
Preferred DNS Server {"SetEnv":{"NetWork":{"stDns":
{"szDns1":"8.8.8.8"}}}}
83

Avonic CM70-IP Specifications

General

Brand	Avonic
Model	CM70-IP
Category	Security Camera
Language	English